How to use Laser heat transfer paper
This paper can be transferred to dark coloured 100% cotton, polyester blends and 100% Polyester fabrics.
1. Print off a sheet of Laser transfer paper. You will need to change your printer settings to suit the printer. Either change them to thick paper, coated paper or labels mode. Try and feed the paper through the easy feed try if you have one.
2. Cut out your design (you can also use a cutting machine) and press it face up on the garment. Then place a sheet of silicon paper on top of the whole surface.
3. Using and hand Iron. Press each section of the design for about 15 seconds, continue this process until the whole design is covered, and peel off the silicon paper immediately.
4. Using a Heat Press- set the machine at 120-125 degrees (236-246 F) and press under 30-40 PSA for 10-12 seconds. Peel off the silicon paper immediately.
The best Laser heat transfer paper
|Laser heat transfer paper Reviews|
3.8/5 from 34 reviews
2.7/5 from 25 reviews
Always keep unused paper packed and sealed in a plastic bag until used at normal room temperature.
How to Wash
Always turn garment inside out for washing, you can wash the garment at 40 degrees
Use normal detergent and not bleach
Do not dry clean or use tumble dryer
Do not iron directly onto the image.
You cannot use this paper in all laser printers and copiers, please use the non-fuser oil type printers when using this paper. Always test to determine the suitability of the paper for use in conjunction with your equipment and methods.