The inkjet wood veneer sheets have just arrived. 100% wood you can print using
your inkjet printer.
Each sheet is different and there will be variations of colour running through them. You can only use these sheets through a top loading inkjet printer. You cannot use them in an HP printer, or a printer which curls back on itself! the sheets will jam. You need to use a printer which is a top loading printer where the paper goes through top to bottom. We have used an Epson printer to print off our sheets.
You don't have to change the settings but if you have problems, change the paper settings to thick card.
You can only use these sheets for an inkjet printer, you can't use a laser printer.
We have only had these sheets for a short while and we made a veneer mirror
frame and some cards. The veneer is very easy to cut
and I am sure you will not have any problems putting it through a die-cutter.
The back of the veneer is paper backed, you can use
any type of glue to attach it onto most surfaces. You need to store this paper
flat and in a dry place. If you are not going to use
them for a while then placing a heavy object on top would be a good idea.