This could be the answer to many model makers prayers. Helping you to
create white lettering/image decals on a dark surface.
Or if you want to create metallic lettering on a dark or a light surface. These
decals are produced with no carrier film.
You can use this system on any kind of surface, wood, coated metals, paper,
plastics, ceramics, silk and even curved surfaces.
The System works as a wet and dry system together and uses foils. You need
to print the special paper off using a laser printer or if you don't have a
computer you can draw your images by hand
and get the images copied onto the special paper using a photocopier.
Pulsar the company who produce this product has provided extremely accurate
instructions of how to use this new product. They have a great website showing
many examples
of what this new system could be used for.
Here is the link to their
website, which gives you all the information you need about the product
They have produced a great video showing how the product works here.
We are selling the kit with all you need to start, including the KK2000
Adhesive spray + Free postage.
For detailed instructions of how to use the product, click here and download the PDF document.
What is included in the kit?
Toner transfer paper, 2 packs (20 sheets) in 8-1/2 inches x 11 inches
Sulky KK2000 Spray
TRF- Sampler pack, 19 foils- 8 inches wide x 36 inches long
foil colours are, 12 metallic shades, 3 pigment, 1 clear, 2 holographic and
1 metallic reflector.
3M 2080 tape (1 inch x 180 inches)
CarrierTRF (8 inches x 15 ft)
Carrierboard ( 2 each 8 inches x 10 inches)
Tack cloth
Sample images
Technique instructions.
To use this kit you will also need;
A laser printer or copier
A laminating machine. (Please check manufacturers website for brand recommendation)
Hot air or paint stripping gun.
U.S. Letter and A4 sized paper are very similar in size. Most printers will have a U.S. Letter setting as well as A4. (A4 - 210mm x 297mm, U.S.Letter - 215.9mm x 279.4mm)